Skip Navigation

FAQ Search

Placing your Polk Omni products into "Setup" mode if it doesn't automatically go into it.

How do I put my Polk Omni product into set-up mode if it does not automatically go into set-up mode?   

Your Polk Omni product has two Setup modes: Standard and WPS.

Standard Mode

To place the device into standard set up mode:
1 - Press and hold the "Setup" button for eight seconds.
      Note: You will hear two tones separated by a silence.


2 - After the second set of tones, at approximately eight seconds, release the "Setup" button.
      Note: The "Setup indicator" light will begin to pulse slowly within about a minute. You may now proceed with standard set up
Image

WPS Mode

To place the device into WPS mode:
1 - Press and hold the "Setup" button for four seconds.
      Note: You will hear two tones.

2 - Release the button and the blue light will blink twice repeatedly.

Image
3 - Press the "WPS" button on your WiFi router to engage the routers WPS mode.
Image


For more information consult your wireless router’s owner’s manual.

Your rating has been submitted, please tell us how we can make this answer more useful.

Print