How do I put my Polk Omni product into setup mode if it does not automatically go into setup mode?
Your Polk Omni product has two set-up modes: WPS and Standard.
Standard set up mode
To place the device into standard set up mode:
1 - Press and hold the setup button for eight seconds. Note: You will hear two tones separated by a silence. After the second set of tones, at approximately eight seconds, release the setup button.
2 - The setup indicator light will begin to pulse slowly within about a minute. You may now proceed with standard setup.
To place the device into WPS mode:
1 - Press and hold the setup button for four seconds. You will hear two tones tones.
2 - Release the button and the blue light will blink twice repeatedly.
3 - Press the WPS button on your WiFi router to engage the router's WPS mode.
For more information consult your wireless router’s owner’s manual.